Right Angle Surface Probe 90˚ tip, handle angle 15°
Have questions about buying this product?
Right Angle Surface Probe (90˚ tip, handle angle 15°, Single / Single Shielded)
This product does not have additional information.
This product has no features.
| Designation | Tip Ø ‘D’, mm | Drop length, mm | Length, mm | Centre Frequency | Connector | Material |
| SU200K5A15°4.5Dx6.4-105 S | 4.5 | 6.4 | 105 | 200 kHz | Microdot
| Fe/NFe |
| SU500K5A15°3Dx6.4-105 S | 3 | 6.4 | 105 | 500 kHz | Microdot
| Fe/NFe |
| SU500K5A15°4.5Dx6.4-105 S | 4.5 | 6.4 | 105 | 500 kHz | Fe/NFe | |
| SU500K5A15°4.5Dx12.7-105 S | 4.5 | 12.7 | 105 | 500 kHz | Fe/NFe | |
| SU2М5A15°2.5Dx2.7-105 S | 2.5 | 2.7 | 105 | 2 MHz | NFe | |
| SU2М5A15°3Dx2.7-105 S | 3 | 2.7 | 105 | 2 MHz | NFe | |
| SU2М5A15°3Dx6.4-105 S | 3 | 6.4 | 105 | 2 MHz | NFe | |
| SU2М5A15°3Dx12.7-105 S | 3 | 12.7 | 105 | 2 MHz | NFe | |
| SU6М5A15°2.5Dx6.4-105 S | 2.5 | 6.4 | 105 | 6 MHz | NFe |
| SU | 200K | 5A | 15° | 4.5D | x | 6.4 | – | 105 | S(Sh) |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
|
1. SU – surface probe for surface flaws detection.
2. Probe frequency:
“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.
3. Drop angle of a sensing element to the probe axis “5А” is 90.
4. Angle of a handle.
5. Probe tip diameter, mm
6. Drop length, mm
7. Probe length, mm. Standard length of 105 mm (4.1″) can be changed upon request.
8. Probe type designation: “S”. “S” – Single coil probe.
Probes of standard type are manufactured unshielded. In case a shielded probe is required, when making an order, please indicate the letters ”Sh” (Shielded) at the end of a designation code.
This product has no accessories.
This product does not have software options.
Downloads
