DMQ QC3 F Coating Thickness Gauge
Ferrous Base
Have questions about buying this product?
The DMQ QC3 F is our most popular separate probe coating thickness that is supplied with a standard straight Ferrous probe (extended range and miniature probes are also available) to measure coatings and platings applied over Ferrous or magnetic substrates.
The gauge features 3 simple to follow step-by-step calibration modes, a large LCD display, statistics and much more.
Measuring
- Ferrous Base
- Eddy Current
- Range:
0 – 1500µm
0 – 60Mils - Resolution:
Up to 99.9µm, 0.1µm
Up to 4.99Mil, 0.01Mil Above 100µm, 1µm
Above 5Mil, 0.1Mil
Calibration
- 3 step by step calibration modes
Units
- Metric (µm)
- Imperial (Mils)
Graphic LCD Display
- LCD 128×64 pixels
- LED backlight illumination
(ON, OFF, Auto) - Digits:
17mm / 0.66in tall - Adjustable digital contrast
Multi-Language
- English
- Spanish
- Portuguese
Features
- Coupling indicator
- Capture minimum
- Statistics
- Continuos measurements
Model Upgrade Licenses
- Upgrade to a QC3 DLF with the purchase of a model upgrade license
Data Logger
- 5000 readings that can be viewed on the unit screen
- Data cannot be transferred to a PCTo transfer data to a PC upgrade to a QC3 DLF
Connections
- Type Lemo “0B” connector for probe
- The USB port can be used if upgrading to a QC3 DLF
Alarms
- Low & High, user defined
- Alarm types
Visible: Flashing backlight and irregular digits
Audible: Intermitent beep
Warranty
- 5 year limited on electronics
- 6 months on accessories
Front Panel
- Touch-Sense with sensitivity adjustment
- No mechanical parts
- Auto pressure recognition
- Auto scrolling recognitio
Power Supply
- 2 x AA 1.5v Alkaline
- 2 x AA 1.2v Ni-MH Rechargeable
- Easy slide battery compartment cover
Dimensions
- H: 117mm / 4.60in
- L: 78.74mm / 3.10in
- W: 24mm / 0.94in
| DMQ QC3 F standard configuration | |||
| • | DMQ QC3 F electronic unit | ||
| • | DMQ straight Ferrous probe | ||
| • | Ferrous base | ||
| • | 3 shims for calibration | ||
| • | Printed user manual | ||
| • | High impact carrying case | ||
| • | Certificate of conformity | ||
Measuring
Method:
Eddy current
Range:
0 to 15mm / 0 to 5.905in
*Depending on probe and material
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Precision:
±1 at 3% +2μm (+0.07Mil) *Depending on probe
Measuring Velocity:
Approximately 99 measurements per minute
Units
Metric:
Microns (µm)
Imperial:
Inches (Mils)
Calibration
Modes:
Base and one point
One point
Base only
Features
Coupling:
Coupling indicator
Capture Minimum:
Holds minimum value
Statistics
Types:
Maximum, Minimum, Range, Average
Alarms
Low & High:
User defined value
Alarm Types:
Visible: Flashing backlight or irregular digits
Audible: Intermitent beep
Display
Digits:
17mm / 0.66in tall
Graphic LCD:
128×64 pixels
Viewable Area:
45 x 30mm / 1.77 x 1.18in
Backlight:
LED backlight (ON, OFF, Auto)
Contrast:
Digital 30 steps
User Interface
Languages:
English, Spanish, Portuguese
Menu Screens:
Icon based
Warranty
Electronic Unit:
5 year limited
Probes:
6 months
Probe
Types:
Straight Ferrous (standard)
Probe Range:
Ferrous, 0 to 1500µm or 0.025 to 19.999in
Resolution:
Up to 99.9µm, 0.1µm or up to 4.99Mil, 0.01Mil
Above 100µm, 1µm or above 5Mil, 0.1Mil
Material Base:
Ferrous: Iron, Steel, Magnetic Stainless Steel
Minimum Base Thickness:
Ferrous: 0.3mm or 0.01in
Minimum Convex Radius:
Ferrous: 2mm or 0.07in
Minimum Concave Radius:
Ferrous: 25mm or 0.98in
Minimum Sample Diameter:
5mm or 0.19in
Data Logger
Storage:
Up to 5000 readings that can be viewed on the unit screen
Data Transfer:
NOT AVAILABLE
Capture Modes:
Manual: touch the Store key
Automatic: automatic while the probe is coupled
Model Upgrade Licenses
Upgrade to a QC3 DLF with the purchase of an upgrade license
Connect to PC
Connectivity:
USB (cable included) or RS232 (optional cable)
Front Panel
Touch-Sense Keypad:
No mechanical parts
Keypad:
Sensitivity adjustment
Auto pressure detection
Auto scrolling detection
Electronic Unit
Dimensions:
H: 117mm / 4.60in
L: 78.74mm / 3.10in
W: 24mm / 0.94in
Weight:
200g / 7.05oz with batteries
Working Temperature:
-10°C to 50°C / 14°F to 122°F
Storage Temperature:
-20°C to 60°C / -4°F to 140°F
Enclosure:
High impact ABS with rubber sides for easy grip
Front Panel:
Polycarbonate
Power Supply
Batteries:
2 x AA 1.5v Alkaline
2 x AA 1.2v Ni-MH Rechargeable
Battery Life:
100 hours with backlight off
Battery Indicator:
On all screens with a low level alarm
Auto-Off:
Programmable 1 to 120 minutes
